JDM Auto Link: February 2014

Carbon Fibre Front Strut Tower Bar - BCNR33/BNR34

Pre-owned Carbon Fibre Front Strut Tower Bar to fit the Nissan Skyline R33 GT-R (BCNR33) and the R34 GT-R (BNR34). Pretty hard part to come by and built to the best of Japanese quality.

Email us at sales@jdmautolink.net for pricing and delivery to your location.

- ITEM SOLD IN THE UK -

BNR34 Brembo Calipers with Rotors #05

Pre-owned set of front and rear Nissan Skyline R34 GT-R (BNR34) Brembo calipers with rotors. These makes a great addition to non-Brembo equipped Nissan Skyline (R32, R33 and R34) and the Nissan Silvia (S13, S14 and S15.

The set of brakes will also comes with a brake pads with plenty of life in it. Contact us at sales@jdmautolink.net for pricing and delivery to your location.

- ITEM SOLD -

Front Bumper - BNR34 #04

Pre-owned front bumper off the Nissan Skyline R34 GT-R (BNR34). The bumper is in mint condition and would be great to serve as a spare, to replace a damaged unit or for those GTT owners who want to convert to the BNR34 look.

Contact us at sales@jdmautolink.net for pricing and delivery to your location.

- ITEM SOLD -

TRD Meter Cluster - SXE10

Mint condition rare TRD Meter Cluster for the Toyota Altezza (SXE10). This meter reads to 220km/h with a 10,000 rpm rev counter.

Email us at sales@jdmautolink.net for pricing and delivery to your location.

- ITEM SOLD TO A CUSTOMER IN NEW ZEALAND -

GRID Hicas Controller

Pre-owned GRID Hicas Controller to suit Nissan hydraulic type Hicas system. This electronic device allows you to turn the Hicas system on of off.

Suitable for:

180SX - KRPS13/SR20DET
Fairlady Z / 300ZX - Z32/VG30DETT
Silvia - KPS13/SR20DET
Skyline GT-R - BNR32/RB26DETT

Largus Anti-Roll Bars / Sway Bars - HCR32 Skyline

Pair of pre-owned front and rear Largus Anti-Roll Bars / Sway Bars for the Nissan Skyline R32 GTS (HCR32). This will help decrease body roll and sharpen the handling characteristics of your vehicle whether you have the standard OEM suspension or full coil-over suspension. These are an excellent upgrade for anyone looking to increase the handling of their vehicle.

BNR34 Front Diffuser #01

Pre-owned original Front Diffuser for the Nissan Skyline R34 GT-R (BNR34). These attach to the front bumper as part of the factory aero works. There are slight openings on the diffuser typical of pre-owned units. Nothing too bad that your local painter couldn't patch up.

Contact us at sales@jdmautolink.net for pricing and delivery to your location.

- ITEM SOLD TO A CUSTOMER IN CYPRUS -

HKS GT-SS Turbo Kit - RB26DETT (BNR32, BCNR33, BNR34) #3

Set of pre-owned HKS GT-SS Turbo Kit for the Nissan Skyline GT-R (BNR32, BCNR33 and BNR34).

Here is what HKS have to say about the HKS GT-SS Turbo Kit:-

HKS GT Ball-Bearing Sport Turbo Upgrades are bolt-on turbo upgrade kits for factory turbo-charged vehicles. These kits consist of new, larger HKS GT turbos designed to bolt directly on to the stock manifold(s). HKS GT Sport Turbos are designed and sized to promote maximum power and response for maximum airflow throughout the RPM band. From the HKS precision cast turbine and compressor housings to the specially designed blades, each turbo is crafted to provide high levels of performance and quality.

Designed exclusively for the GT-R turbine. Turbine size is within the allowed horsepower of 600ps for a normal engine and it provides enough capacity for maximum performance.

Top output in the high-rpm range is made possible without sacrificing response in the low-rpm range by using a ball bearing turbo as opposed to the metal turbine for the factory-designated unit.

The clearance and shape of the compressor wheel, compressor housing and turbo housing are redesigned to optimum specs. Output in low and medium to high-rpm ranges are now enhanced.

In each kit reinforced adjustable actuators are attached. The spring constant is increased by 50% over the N1 spec. It prevents any pressure drop in the high-boost region. This gives you precise control in the 0.8~1.6km/sq.cm boost range.

There are no shaft plays and the fins are in good condition. Contact us at sales@jdmautolink.net for pricing and delivery to your location.

Aluminum 12cm Wing Up Kit - BNR34

Pair of pre-owned aluminum 12cm Wing Up Kit for the Nissan Skyline R34 GT-R (BNR34). These are attached on top of the stock rear spoiler stands to raise up the rear spoiler blades higher. These are constructed of aluminum with very beautiful welding.

Contact us at sales@jdmautolink.net for pricing and delivery to your location.

- ITEM SOLD TO A CUSTOMER IN AUSTRALIA -

Tein Performance Bar - Lancer Evolution 7,8 & 9 (CT9A)

Brand new Tein Performance Bar for the Mitsubishi Lancer Evolution 7, 8 and 9 (CT9A). TEIN Performance Bars are produced by using A6000 aluminum. TEIN has been able to produce bars, which are not only lightweight but are also exceptionally rigid. The twist and flex that occurs in performance driving is reduced, therefore allowing the driver to obtain the full potential of the suspension. Features include green anodized mounting plates, polished aluminum bar, and EDFC compatibility.

Air Diversion Plate - BNR34

Brand new Japanese made Air Diversion Plate (Radiator Shroud) for the Nissan Skyline R34 GT-R (BNR34). Air will usually escape through the top and bottom of the radiator, with these fitted, it will force more air through the radiator to reduce engine temperature.

The Air Diversion Plate fits over the top of the core support and the radiator. This simple bolt-on piece will increase performance and will also accent your engine bay. Do note that the white coloured film is a protective layer for the stainless steel underneath.

If you are interested in these, email us at sales@jdmautolink.net for pricing and delivery.

- ITEM SOLD -

Carbon Fibre Timing Belt Cover - SXE10 Altezza

Pre-owned Carbon Fibre Timing Belt Cover for the Toyota Altezza (SXE10). This was removed from a JDM Toyota Altezza with BEAMS engine. The manufacturer of the cover is unknown but it displays exceptional quality as expected from Japanese manufacturers.

Email us at sales@jdmautolink.net for a quote including shipping.

- ITEM SOLD TO A CUSTOMER IN CANADA -

Tein Monoflex - BCNR33/BNR34

A set of immaculate Tein Mono Flex for the Nissan Skyline R33 GT-R (BCNR33). These will also be compatible for the Nissan Skyline R34 GT-R (BNR34). The Tein Mono Flex is developed to be the future of axis of sport shock absorbers, used at circuit or on winding road. To meet various situations and to enable precise setting, Mono Flex has lots of know-how and technology poured in, such as newly designed MSV (Micro Speed Valve).

It is full-length ride height adjustable featuring allows separate adjustment of the ride height and the pre-load. Damping adjustments are available via 16 levels of damping force adjustment (compression and rebound together).

Pages